ECO、ECU Series
ECO Actuators with orthogonal motorization
ECU Actuators with coaxial motorization
The new series of actuators INDACT type ECO (Electro Cylinders-Orthogonal) and ECU (Electro Cylinder-Universal),through the use of new materials, components and solutions, has sensibly increased the characteristics of these units regarding axial force,linear speed, working life time and possible solutions,maintaining a compact construction.We have thus designed a standard range made up of 6 sizes for ECO series and 5 sizes for ECU series, each of them available with acme screw (T) or with ball screw (S), with worm gears for ECO series and with planetary gears or in direct drive for the ECU series.
ECO SERIES ACTUATORS
All the ECO series actuators areorthogonal linear actuators, that is with the driving element (motor) at 90° with respect to the pushing rod.The mechanical connection of the unit to the rest of the machine is done through the front and rear clevis of the actuator.
The ECO actuator guarantee the nominal performance indicated in this catalogue, with an intermittent duty of 25% over a total cycle time of 5 minutes for ECO 1, 2, 3; and 20% over 10 minutes cycle time for ECO 25, 50, 100; without shock loads or vibrations,with only axial loads and at an environment temperature of 40°C.
For service factors different from those indicated consult our technical office. The ECO series actuators use a worm gear system, with different ratios to obtain the range of forces and speeds indicated in this catalogue. Standard motorization of ECO actuators is as follows:
ECO 1: DC Motors
ECO 2: DC Motors - Three-phase AC Motors;
ECO 3 - 25 - 50 - 100: Three-phase AC Motors.
ECU SERIES ACTUATORS
All the ECU series actuators are coaxial linear actuators, that is, with the driving element (motor) on the same axis as the pushing rod, cover tube and case and gearbox. The mechanical connection of the unit to the rest of the machine is done through pivot pins on both sides of the case and the clevis on the top of the pushing rod.
The ECU actuators guarantee thenominal performance indicated in this catalogue, with an intermittent duty of 25% over a total cycle time of 5 minutes; without shock loads or vibrations, with only axial loads and at an environment temperature of 40°C. For service factors different from those indicated consult our technical office. The ECU series actuators are built in two basic solutions, with planetary gearbox or in direct drive. The standard motorization of ECU actuators is with three-phase AC motors.
